1. Wipe the machine working surface (using a cloth and ethylic alcohol).Be sure to remove any trace of grease and adhesive residue.
NOTE: To achieve a firm adhesion, the cutting plate must be clean.

2. Place your creasing matrix in the creasing rule by its locator.

3. Reduce your machine pressure, so as to install the creasing matrix system with the least possible pressure.
NOTE: To obtain optimum performance of your creasing matrix system, it is important to install it with the minimum pressure of the machine. This will ensure its long lifetime and avoid any damage that may limit its duration.

4. Remove the adhesive protective foil from the bottom of your creasing matrix and install it by running one working cycle.

5. Once the system is fixed to the machine working surface, remove the locator with a gentle ascending movement.

6. Finally, supply the creasing machine with the adequate pressure for the creasing job you are about to do. With this last procedure your creasing matrix is ready to start working.